Paragraphs Environmental Design

Rainwater Harvesting Potential of Residential Roofs in Selected Tropical Cities: A Secondary Data Assessment

Department of Architecture, Universitas Diponegoro

*Correspondence: sarloniserwib467@hotmail.com

View / Download PDF

Abstract

Residential rooftop rainwater harvesting is frequently assessed from annual rainfall, although water arrives unevenly and must meet a defined demand. This study compares Singapore, Mumbai, and Chennai using published 1981–2010 monthly rainfall normals and literature released before 1 May 2023. Original calculations distinguish effective roof inflow, a monthly pooling benchmark without intermonth carryover, and an idealized seasonal carryover requirement. A standardized 100-square-metre connected roof, collection fraction of 0.80, four occupants, and illustrative target of 50 litres per person per day produce annual inflows of 173.27, 189.86, and 110.63 cubic metres, respectively, against annual demand of 73 cubic metres. All three are annually adequate, but monthly pooling matches 100.0 percent of demand in Singapore, 44.5 percent in Mumbai, and 65.4 percent in Chennai. Ideal seasonal carryover quantities are zero, 40.51, and 25.22 cubic metres; these are mean-month diagnostics, not recommended tank capacities. Rescaling each rainfall profile to 2,000 mm annually preserves the contrast, demonstrating the importance of seasonal distribution independently of annual amount. Sensitivity analysis across 81 roof, efficiency, and demand combinations shows that additional catchment has limited effect on dry-season matching where rainfall is nearly absent. At the higher demand scenario, Chennai becomes annually insufficient, which storage alone cannot remedy. The findings support differentiated service objectives and evaluation of roof area per resident. Daily rainfall sequences, building inventories, usable-water quality, local costs, and operating responsibilities remain necessary before claiming dependable household supply or citywide benefit. The assessment provides a reproducible screening basis while defining the limits of inference from monthly secondary data.

Keywords: rooftop rainwater harvesting; tropical cities; secondary data; rainfall seasonality; residential water demand; seasonal storage; water security

Citation

Bochar S. S. (2024). Rainwater Harvesting Potential of Residential Roofs in Selected Tropical Cities: A Secondary Data Assessment. Paragraphs Environmental Design, 2(2), 59–76. DOI: 10.5281/zenodo.24159353

References

  1. Campisano, A., Butler, D., Ward, S., Burns, M. J., Friedler, E., DeBusk, K., Fisher-Jeffes, L. N., Ghisi, E., Rahman, A., Furumai, H., & Han, M. (2017). Urban rainwater harvesting systems: Research, implementation and future perspectives. Water Research, 115, 195–209. https://doi.org/10.1016/j.watres.2017.02.056
  2. Farreny, R., Morales-Pinzón, T., Guisasola, A., Tayà, C., Rieradevall, J., & Gabarrell, X. (2011). Roof selection for rainwater harvesting: Quantity and quality assessments in Spain. Water Research, 45(10), 3245–3254. https://doi.org/10.1016/j.watres.2011.03.036
  3. Fewkes, A., & Butler, D. (2000). Simulating the performance of rainwater collection and reuse systems using behavioural models. Building Services Engineering Research and Technology, 21(2), 99–106. https://doi.org/10.1177/014362440002100204
  4. Hamilton, K., Reyneke, B., Waso, M., Clements, T., Ndlovu, T., Khan, W., DiGiovanni, K., Rakestraw, E., Montalto, F., Haas, C. N., & Ahmed, W. (2019). A global review of the microbiological quality and potential health risks associated with roof-harvested rainwater tanks. npj Clean Water, 2, Article 7. https://doi.org/10.1038/s41545-019-0030-5
  5. Hanson, L. S., & Vogel, R. M. (2014). Generalized storage–reliability–yield relationships for rainwater harvesting systems. Environmental Research Letters, 9(7), Article 075007. https://doi.org/10.1088/1748-9326/9/7/075007
  6. India Meteorological Department. (2015). Climatological normals 1981–2010. https://imdpune.gov.in/library/public/Climatological%20Normals%20%281981-2010%29/1981-2010%20CLIM%20NORMALS%20%28ALPHABETICAL%29.pdf
  7. Lo, K. F. A., & Koralegedara, S. B. (2015). Effects of climate change on urban rainwater harvesting in Colombo City, Sri Lanka. Environments, 2(1), 105–124. https://doi.org/10.3390/environments2010105
  8. Mendez, C. B., Klenzendorf, J. B., Afshar, B. R., Simmons, M. T., Barrett, M. E., Kinney, K. A., & Kirisits, M. J. (2011). The effect of roofing material on the quality of harvested rainwater. Water Research, 45(5), 2049–2059. https://doi.org/10.1016/j.watres.2010.12.015
  9. Meteorological Service Singapore. (2015). Annual climatological report 2015. https://www.weather.gov.sg/wp-content/uploads/2016/02/Annual-Climatological-Report-2015.pdf
  10. Mitchell, V. G. (2007). How important is the selection of computational analysis method to the accuracy of rainwater tank behaviour modelling? Hydrological Processes, 21(21), 2850–2861. https://doi.org/10.1002/hyp.6499
  11. Ndiritu, J., Moodley, Y., & Guliwe, M. (2017). Generalized storage–yield–reliability relationships for analysing shopping centre rainwater harvesting systems. Water, 9(10), Article 771. https://doi.org/10.3390/w9100771
  12. Quinn, R., Rougé, C., & Stovin, V. (2021). Quantifying the performance of dual-use rainwater harvesting systems. Water Research X, 10, Article 100081. https://doi.org/10.1016/j.wroa.2020.100081
  13. Radonic, L., & Zuniga-Teran, A. (2023). When governing urban waters differently: Five tenets for socio-environmental justice in urban climate adaptation interventions. Sustainability, 15(2), Article 1598. https://doi.org/10.3390/su15021598
  14. Rahman, A., Keane, J., & Imteaz, M. A. (2012). Rainwater harvesting in Greater Sydney: Water savings, reliability and economic benefits. Resources, Conservation and Recycling, 61, 16–21. https://doi.org/10.1016/j.resconrec.2011.12.002
  15. Sample, D. J., & Liu, J. (2014). Optimizing rainwater harvesting systems for the dual purposes of water supply and runoff capture. Journal of Cleaner Production, 75, 174–194. https://doi.org/10.1016/j.jclepro.2014.03.075
  16. Srinivasan, V., Gorelick, S. M., & Goulder, L. (2010). Sustainable urban water supply in south India: Desalination, efficiency improvement, or rainwater harvesting? Water Resources Research, 46(10), Article W10504. https://doi.org/10.1029/2009WR008698
  17. Takagi, K., Otaki, M., & Otaki, Y. (2018). Potential of rainwater utilization in households based on the distributions of catchment area and end-use water demand. Water, 10(12), Article 1706. https://doi.org/10.3390/w10121706
  18. Takagi, K., Otaki, M., Otaki, Y., & Chaminda, T. (2019). Availability and public acceptability of residential rainwater use in Sri Lanka. Journal of Cleaner Production, 234, 467–476. https://doi.org/10.1016/j.jclepro.2019.06.263
  19. Vieira, A. S., Beal, C. D., Ghisi, E., & Stewart, R. A. (2014). Energy intensity of rainwater harvesting systems: A review. Renewable and Sustainable Energy Reviews, 34, 225–242. https://doi.org/10.1016/j.rser.2014.03.012
  20. Ward, S., Memon, F. A., & Butler, D. (2012). Performance of a large building rainwater harvesting system. Water Research, 46(16), 5127–5134. https://doi.org/10.1016/j.watres.2012.06.043
  21. World Health Organization. (2022). Guidelines for drinking-water quality (4th ed., incorporating the first and second addenda). https://www.who.int/publications/i/item/9789240045064
  22. Zhang, S., Jing, X., Yue, T., & Wang, J. (2020). Performance assessment of rainwater harvesting systems: Influence of operating algorithm, length and temporal scale of rainfall time series. Journal of Cleaner Production, 253, Article 120044. https://doi.org/10.1016/j.jclepro.2020.120044